I’ve been lifting on and off for 12 years now. I’ve always intended to compete in a powerlifting meet, but never strung together enough consistency for competing to make sense. One of my goals for 2026 was to finally get my act together and lift in a meet.

I took part in the Lift Like a Girl meet on 17 Oct 2026, and as promised, here’s my full meet report.

Goals

My goals were simply to gain meet experience, make 8-9 lifts, and have fun.

Meet experience

As a complete and total newbie to competitive powerlifting, I had no idea what to expect. I’ve absorbed enough by osmosis to understand the 2-hour weigh-in, the equipment list, the meet commands, what makes a good lift or a no-lift, but experiencing it is a completely different thing.

I went into this meet with a lot of unknown unknowns. For example, lifters are divided into flights, and two flights alternate at a time. So Flight A squats, then Flight B squats, then Flight A benches, then Flight B benches and so on. I didn’t even know I was in a flight, let alone which flight. I showed up at 7am for the start of the AM session, only to be told I was in Flight D in the PM session and I should come back at 12:30pm. This information had been disseminated on Instagram, a platform I don’t use, and I didn’t have enough experience to know that I should look for it or ask for it.

After I got over my frustration, I went home, spent some time with my husband, napped an hour, and headed back out for the PM session.

The volunteers at the registration desk recognized me on sight, which was nice – and from that point on I felt like I was very well taken care of. The meet officials always made sure I knew where I needed to be.

On the whole, even with my early-morning snafu, I thought this was a really well-run meet. Powerlifting Singapore knows how to run a tight ship on meet day.

Lifts

I went 9/9 on lifts:

  • Squat: 75kg, 85kg, 95kg
  • Bench: 47.5kg, 50kg, 55kg
  • Deadlift: 100kg, 112.5kg, 120kg

My historical PRs are so long ago they’re irrelevant, and I don’t actually remember my squat PR. It was either 102.5kg or 107.5kg. My pre-meet bench PR was 55kg, and my deadlift PR was 117.5kg, so I equalled my bench PR and pulled a new deadlift PR.

Here’s a video of each of my third lifts:

Squat

I was coming off a mild left adductor injury that stopped me squatting heavy in the two weeks leading up to the meet. The last squat I did before the meet was a 60kg single four days out, and even that was uncomfortable. Fortunately, the adductor improved enough for me to pencil in a 75kg opener, and I warmed up to 80kg. Which is slightly absurd, lifting heavier than the opener in the warm-up room, but it is what it is.

All the lifts were straightforward, and the 95kg only slowed a bit through the sticking point.

When I started lifting, I used to squat to parallel because I imagined I’d compete someday. As the years went by and I found myself struggling to string together a sustained stretch of training, competition receded as a primary goal and I started questioning why I was squatting to parallel. I switched over to squatting my full range of motion, and that simply became the squat I was most comfortable with. I wasn’t going to change things up for my first meet: I squatted to the depth I knew, which is absurdly deep by IPF standards.

Bench

Bench is a tricky lift to assess, at least for me. I often find that a given weight might be challenging but doable, but put 2.5kg more on the bar and the bar simply doesn’t move through the sticking point. I was confident I could do 55kg, so I aimed for that as my third lift, and worked up to it.

My original plan was to open at 47.5kg, then do 52.5kg as a second attempt. I considered 57.5kg for a third but again, for a first meet, I wanted to to focus on making the lifts and setting meet PRs that I knew I was capable of.

In any case, I didn’t get my request for a 52.5kg second attempt to the meet officials in time. When that happens, the officials record you as taking a 2.5kg jump, so they entered my second attempt as 50kg.

Lesson learnt: have someone else handle your meet!

Deadlift

Going into the deadlift, I had some concerns about grip. On heavier high-rep deadlift sets, my grip is usually what fatigues first if I’m not using straps. On deadlift singles, losing grip usually isn’t an issue, but I have to will myself to keep my hands around the bar, even with chalk.

At the meet, I pulled an easy 100kg opener, then a comfortable 112.5kg, and then hit a 120kg PR, which was honestly pretty easy. You can see on the video that it moved with no grind once it was off the floor.

Only afterwards did I realize I had not even thought about grip at all throughout the meet. It turns out that fully chalked up, I can hold on to a powerlifting bar perfectly fine.

For context: there are many different types of barbells. A powerlifting bar has very aggressive knurling, because in powerlifting, once you put your hands around the bar, there is no need for your hands to rotate around the bar.

Olympic weightlifting is different: you pull from the floor, then drop underneath the bar and catch it either in an overhead squat for the snatch, or a front squat for the clean. As you do so, your hands must rotate around the bar, so the knurling is less aggressive than on a powerlifting bar.

And training bars used in gyms may be gentler still: when you’re doing a high volume of work, you don’t want the knurling to start tearing into your skin. This depends on the manufacturer and their target market, though.

All this is to say: it turned out that deadlift grip was a total non-issue.

Observations

When I started lifting in 2014, the prevailing wisdom seemed to me at the time to be “heels for squats, flats for deadlifts”. That’s how I started, that’s what feels most comfortable to me, and today when I do a bodyweight squat barefoot I find my heels want very badly want to come off the ground.

I’ve noticed in the years since then that squatting in flats has become more acceptable among powerlifters. I assume that’s because maximal ROM isn’t a priority in powerlifting, and some lifters have anthropometry that simply favours a flatter shoe. Still, I was surprised to see just how common flats were, and how few lifters squatted in heels.

What’s next?

I’m halfway between the 84kg and 76kg weight classes, and I’d like to compete at my next meet in the 76kg class. I also ended up sandbagging some of those lifts: the 95kg squat and 120kg deadlift are definitely not maximal. I’m not sure I could have benched 57.5kg on the day, but I’d like to put myself in a position to try that at the next meet.

I don’t have a specific date to work towards, but I’m very much looking forward to the next meet!